Poor cula performance
5 posts
• Page 1 of 1
Poor cula performance
by cbv3b » Thu Jun 23, 2011 10:28 am
- cbv3b
- Posts: 3
- Joined: Wed Nov 10, 2010 2:05 pm
Re: Poor cula performance
by kyle » Thu Jun 23, 2011 12:23 pm
Private support is for non-academic purchases, only.
With regards to your speed, are you sure your benchmarks are running on the correct device? Are your servers under heavy load when you are benchmarking? Those numbers seem very low for both the CPU and GPU.
With regards to your speed, are you sure your benchmarks are running on the correct device? Are your servers under heavy load when you are benchmarking? Those numbers seem very low for both the CPU and GPU.
- kyle
- Administrator
- Posts: 301
- Joined: Fri Jun 12, 2009 7:47 pm
Re: Poor cula performance
by cbv3b » Thu Jun 23, 2011 1:25 pm
Yes the benchmarks are running on the correct device, and top showed that only a few root threads were running. What was concerning to me was that he FERMI devices were so much slower than the TESLA device...
- cbv3b
- Posts: 3
- Joined: Wed Nov 10, 2010 2:05 pm
Re: Poor cula performance
by kyle » Thu Jun 23, 2011 1:27 pm
For single precision, there should be about a 20% performance increase between generation. For double precision that increase is upwards of 100%.
I'd suggest running other CUDA SDK examples to further benchmark your performance.
I'd suggest running other CUDA SDK examples to further benchmark your performance.
- kyle
- Administrator
- Posts: 301
- Joined: Fri Jun 12, 2009 7:47 pm
Re: Poor cula performance
by cbv3b » Fri Jun 24, 2011 7:56 am
Looks like I'm have some problems with some of the SDK routines too. Should have checked this first. Thanks 
- cbv3b
- Posts: 3
- Joined: Wed Nov 10, 2010 2:05 pm
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest